ContraX-Electromagnetic Flowmeter-CLLF-MG
Electromagnetic Flowmeter is designed for accurate measurement of the flow rate of conductive liquids. It provides high measurement accuracy and repeatability, with support for forward, reverse, and net flow measurement. Suitable for applications such as water, wastewater, industrial liquids, corrosive chemicals, and slurry, with various lining materials available to match different process conditions.
- ลักษณะพิเศษ
- Specification
- Download
- High measurement accuracy and stability
- No moving parts ? low maintenance and long service life
- Low pressure loss through the pipeline
- Suitable for conductive liquids, including wastewater and liquids with suspended solids
- Wide range of sizes and materials to suit different applications
- Easy integration with PLC and control systems
- Multiple output and communication options, including 4?20 mA, Pulse, and Modbus RTU
Diameter (mm): Pipeline PTFE lining: DN10-DN600
Flow direction: Positive flow, reverse flow and net flow
Repeatability Error: ±0.1% of measured value
Accuracy Class: ±0.5% of reading@1m/s(0.2% optional)
Rated working pressure: (High pressure can be customized)
- DN10~DN25 ≤ 4.0 MPa
- DN32~DN150 ≤ 1.6 MPa
- DN200~DN600 ≤ 1.0 MPa
- DN700~DN2000≤ 0.6 MPa
Velocity Range: 0.1-15m/s
Conductivity Range: ≥5µs/cm
Signal Output: 4-20 mA load resistance 0-750 Ω pulse/frequency, control level
Power Supply: 220VAC, alowance15% or 24VDG, ripple W5%
Requirements for Straight Pipe Length: Upstream≥5DN, downstream≥3DN
Explosion-proof Grade: Exd [ib]qlCT6Gb
Protection Grade: IP65, up to IP68 forspecial orders
Ambient Temperature: -25°C-+60°C
Relative Humidity: 5%-95%
Total Power Consumption: Less than 20w
