ISOLATING TERMINAL SERIES 8082

The isolating terminals of Series 8082 can be used to manually isolate circuits for maintenance and test purposes. The isolating terminals are mounted in Ex e enclosures and may be operated in energized condition even in explosion-protected areas. When the contact is open, the incoming line terminal is covered. The actuator can be padlocked in zero position according to IEC/EN 60947-5-1 with a padlock. The devices can be combined into blocks using special top hat rails, which can be found in the accessories.

– Single pole, NC contact positive opening operation
– For installation in Ex e enclosure
– Clear switch position indication
– Actuator padlockable in zero position
– For snap-mounting or screw fixing via adaptor
– Connection cross-section: 0.75 … 2.5 mm² single-wire / finely stranded
– Enclosure made of polyamide